How to build a 12V battery pack with EEL-Jupiter(EEL-Venu)?
EEL-Jupiter and EEL-Venu are our first try to battery pack, we want to make the DIY batteries in an easy way, especially since there are increasingly beginners in building the battery pack.
Instruction Youtube video:
https://www.youtube.com/watch?v=Pd5mbwQJ688&list=TLGGrbTyV2hMPkkyMTA0MjAyMg&index=1
If you do not have time to watch the video, we also have the paper version:
What you got from the package:
1*full metal battery box
1*bracket
1*200A BMS
1*LCD screen
2*terminal connectors
serval EVA protection and screws.
Step1.Paste EVA protections inside the box and batteries.
Step2.Test your lifepo4 cells,make sure they are matched and balanced.
Step3.Put on bracket and fasten it to the box.
Step4.Fasten the BMS board.
Step5.Fasten the BMS on the cover
Step6.Fasten the 2*terminal connectors.
Step7.Put on bus bars and wires
Step8.Connect battery positive terminal and screen positive.
Step9.Connect the BMS Board C-.
Step10.Connect BMS board B- and screen negative.
Step11.Connect the BMS and screen.
Step12.Well done!Check the screen and see if it is working.
Step13.Final step,fasten the outside screws and terminal screws.
Congratulations,you get your own battery pack now!
